• 1018 Steel for ease and safety for welding
  • Smooth bore protects shafts from damage
  • Superior holding power over set-screw type collars
Made from 1018 steel, Weldable Shaft Collars are lead-free to make welding to components easier and safer.

1-Piece Clamp-Type Shaft Collars are designed for use on standard round shafts, hard or soft, as well as on thin wall tube or over a split hub. They are precision machined, non-marring, easy to adjust, with high clamping power.
1 - 10 of 10 | Results Per Page | View | Unit of Measure
1 

Part Number

Bore Size

Material

Type

Outside Diameter

Width

7MW004 N/A 1/4 in N/A Steel N/A Low Profile N/A 0.688 in N/A 0.313 in
7MW006 N/A 3/8 in N/A Steel N/A Low Profile N/A 0.875 in N/A 0.375 in
7MW008 N/A 1/2 in N/A Steel N/A Low Profile N/A 1.125 in N/A 0.406 in
7MW010 N/A 5/8 in N/A Steel N/A Low Profile N/A 1.313 in N/A 0.438 in
7MW012 N/A 3/4 in N/A Steel N/A Low Profile N/A 1.500 in N/A 0.500 in
7MW100 N/A 1 in N/A Steel N/A Low Profile N/A 1.750 in N/A 0.500 in
7MW104 N/A 1-1/4 in N/A Steel N/A Low Profile N/A 2.063 in N/A 0.500 in
7MW108 N/A 1-1/2 in N/A Steel N/A Low Profile N/A 2.375 in N/A 0.563 in
7MW112 N/A 1-3/4 in N/A Steel N/A Low Profile N/A 2.750 in N/A 0.688 in
7MW200 N/A 2 in N/A Steel N/A Low Profile N/A 3.000 in N/A 0.688 in
1 - 10 of 10 | Results Per Page | View | Unit of Measure
1