• Provide a cushioned surface for a variety of applications
  • Reducing noise and excessive wear and tear
  • Fully compatible with shaft collars in a wide variety of sizes.
End Stop Cushions are neoprene spacers that match the ID/OD dimensions of their shaft collars to reduce noise and wear caused by metal to metal contact in linear stroke limiting or lever actuation applications.

Stocked in Neoprene:
  • Shore A-50
  • Shore A-70
1 - 8 of 8 | Results Per Page | View | Unit of Measure
1 

Part Number

Inside Diameter

Material

Type

Outside Diameter

Thickness

42N50A008 N/A 0.500 in N/A Neoprene N/A Shore A-50 N/A 1.125 in N/A 0.062 in
42N70A008 N/A 0.500 in N/A Neoprene N/A Shore A-70 N/A 1.125 in N/A 0.062 in
42N50A010 N/A 0.625 in N/A Neoprene N/A Shore A-50 N/A 1.313 in N/A 0.062 in
42N70A010 N/A 0.625 in N/A Neoprene N/A Shore A-70 N/A 1.313 in N/A 0.062 in
42N50A012 N/A 0.750 in N/A Neoprene N/A Shore A-50 N/A 1.500 in N/A 0.062 in
42N70A012 N/A 0.750 in N/A Neoprene N/A Shore A-70 N/A 1.500 in N/A 0.062 in
42N50A100 N/A 1.000 in N/A Neoprene N/A Shore A-50 N/A 1.750 in N/A 0.062 in
42N70A100 N/A 1.000 in N/A Neoprene N/A Shore A-70 N/A 1.750 in N/A 0.062 in
1 - 8 of 8 | Results Per Page | View | Unit of Measure
1