CAD (0)
  • Cart is empty
  • Assure precise shaft alignment
  • Axial runout less than .001 TIR
  • Flange allows for mounting components
  • Includes standard keyway
  • Smooth bore protects shafts from damage
The Precision Sleeve Flange coupling allows for mounting components such as gears, motors, brake assemblies etc. to the coupling. The flange includes three through holes and three tapped holes.

It features a solid center section that provides a close tolerance fit on ground shafting, includes a keyway, and the Accu-Clamp™ design which incorporates integral self-centering clamping collars at both ends.

To assure precise shaft alignment, it maintains <.001 TIR concentricity while in use. It is precision machined, non-marring, easy to adjust, with high clamping power.

Stocked in:
  • Steel
1 - 6 of 6 | Results Per Page | View | Unit of Measure
1 

Part Number

Bore Size A

Bore Size B

Material

Flange OD

Total Length

CAD

5L008008KPXC N/A 1/2 in N/A 1/2 in N/A Steel N/A 2.230 in N/A 1.875 in N/A CAD Icon (for items table)
5L010010KPXC N/A 5/8 in N/A 5/8 in N/A Steel N/A 2.605 in N/A 2.250 in N/A CAD Icon (for items table)
5L012012KPXC N/A 3/4 in N/A 3/4 in N/A Steel N/A 2.980 in N/A 2.625 in N/A CAD Icon (for items table)
5L100100KPXC N/A 1 in N/A 1 in N/A Steel N/A 3.230 in N/A 3.000 in N/A CAD Icon (for items table)
5L104104KPXC N/A 1-1/4 in N/A 1-1/4 in N/A Steel N/A 3.480 in N/A 3.375 in N/A CAD Icon (for items table)
5L108108KPXC N/A 1-1/2 in N/A 1-1/2 in N/A Steel N/A 3.730 in N/A 3.750 in N/A CAD Icon (for items table)
1 - 6 of 6 | Results Per Page | View | Unit of Measure
1