Use with Pipe Adapter Bushings to match OD of Schedule 40 Pipe
Shaft Mounting Collars feature a flat and a countersunk, tapped hole to mount easily to a surface or component, or hung from a threaded rod.
1-Piece Clamp-Type Shaft Collars are designed for use on standard round shafts, hard or soft, as well as on thin wall tube or over a split hub. They are precision machined, non-marring, easy to adjust, with high clamping power.
Shaft Mounting Collars feature a two-piece construction with flats on outside surfaces which are drilled and tapped for attachment to each other. Also included is a countersunk hole for mounting to any surface or hung from a threaded rod. These collars are stackable, secure and easy to open and adjust.
The regular Stackable version has flats on two surfaces for stacking. The Stackable (Cap) version has a single flat to leave a finished, rounded outside surface when no further stacking is required.
2-Piece Clamp-Type Shaft Collars are designed for use on standard round shafts, hard or soft, as well as on thin wall tube or over a split hub. They can be completely disassembled and placed anywhere on a shaft. They are precision machined, non-marring, easy to adjust, with high clamping power.
Shaft Mounting Collars feature a two-piece construction with flats on outside surfaces which are drilled and tapped for attachment to each other. Also included is a countersunk hole for mounting to any surface or hung from a threaded rod. These collars are stackable, secure and easy to open and adjust.
The regular Stackable version has flats on two surfaces for stacking. The Stackable (Cap) version has a single flat to leave a finished, rounded outside surface when no further stacking is required.
2-Piece Clamp-Type Shaft Collars are designed for use on standard round shafts, hard or soft, as well as on thin wall tube or over a split hub. They can be completely disassembled and placed anywhere on a shaft. They are precision machined, non-marring, easy to adjust, with high clamping power.
Shaft Mounting Collars feature a flat and a countersunk, tapped hole to mount easily to a surface or component, or hung from a threaded rod.
Stafford’s exclusive Hinge Shaft Collars are perfect where fast operation is required, such as hostile environments or situations where there are space and time constraints.
Hinge Shaft Collars are functionally similar to two-piece collars, for use on standard round shafts, hard or soft, as well as on thin wall tube or over a split hub.
They are easy to assemble, reposition, and take apart; eliminating fumbling, lost screws and wasted time. Hinge Shaft Collars provide the same axial holding power as conventional collars. They have a smooth bore that will not damage shafts.
Integral hinge with clamping screw and flat surface with a hole for mounting tube, pipe or other devices.
Simplifies assembly and setup for a wide variety of attachment tasks.
Stafford’s new Plastic Hinged Mounting Collars offer users optimum mounting and attachment flexibility.
They can be used for mounting tube, pipe, or cable bundles and for attaching speakers, power strips, signs, sensors, diverter rails, lights, and many other devices.
Stafford Plastic Hinged Mounting Collars feature an integral hinge with a stainless steel clamping screw and one flat section with a hole that is suited for mounting a tube to a surface or for attaching another device to a tube or pipe.
Stocked in 7/8”, 1”, and 1-1/4” I.D. sizes, these injection molded collars simplify assembly and setup for a wide variety of attachment tasks.
Collars are packaged in pairs.
For applications requiring high strength, hinged collars are also available in aluminum, steel, and stainless steel.
Pipe Mounting Collars have bores that matches the outside diameter of standard pipe. They feature a two-piece construction with flats on outside surfaces which are drilled and tapped for attachment to each other. Also included is a countersunk hole for mounting to any surface or hung from a threaded rod. These collars are stackable, secure and easy to open and adjust.
The regular Stackable version has flats on two surfaces for stacking. The Stackable (Cap) version has a single flat to leave a finished, rounded outside surface when no further stacking is required.
2-Piece Clamp-Type Collars can be completely disassembled and placed anywhere on a shaft. They are precision machined, non-marring, easy to adjust, with high clamping power.
Pipe Mounting Collars have bores that matches the outside diameter of standard pipe. They feature a two-piece construction with flats on outside surfaces which are drilled and tapped for attachment to each other. Also included is a countersunk hole for mounting to any surface or hung from a threaded rod. These collars are stackable, secure and easy to open and adjust.
The regular Stackable version has flats on two surfaces for stacking. The Stackable (Cap) version has a single flat to leave a finished, rounded outside surface when no further stacking is required.
2-Piece Clamp-Type Collars can be completely disassembled and placed anywhere on a shaft. They are precision machined, non-marring, easy to adjust, with high clamping power.
Pipe Mounting Collars have bores that matches the outside diameter of standard pipe. They feature a flat and a countersunk, tapped hole to mount easily to a surface or component, or hung from a threaded rod.
Stafford’s exclusive Hinge Shaft Collars are perfect where fast operation is required, such as hostile environments or situations where there are space and time constraints.
A Hinge Collar is functionally similar to a two-piece collar, but since it works as a single unit, it is easy to assemble, reposition, and take apart; eliminating fumbling, lost screws and wasted time.
Hinge Collars provide the same axial holding power as conventional collars. They have a smooth bore that will not damage shafts.
Pipe Collars feature a bore that matches the outside diameter of standard pipe. The collar can be machined to the user’s specifications to mount to a surface or component.
2-Piece Clamp-Type Collars can be completely disassembled and placed anywhere on a shaft. They are precision machined, non-marring, easy to adjust, with high clamping power.
Fit inside standard shaft collars to match standard pipe
Permit expansion and vibration
Available with single or double flange
Can be placed anywhere on pipe or tube
Pipe Adapter Bushings allow standard shaft collars to fit over standard pipe, allowing for mounting to a surface or component. Made of Nylon, they also permit expansion and dampen vibration.
Offered in two styles:
Single Flange: For insertion without disassembling collar
Double Flange: Extra grip when collar can be disassembled
Superior holding power over set-screw type collars
Exclusively stocked by Stafford, these collars fit on standard square shafts. They can be modified (drilled, tapped, welded, etc.) to act as mounts for other components.
2-Piece Clamp-Type Shaft Collars can be completely disassembled and placed anywhere on a shaft. They are precision machined, non-marring, easy to adjust, with high clamping power.
Mount square shafts or structural tubing to components
Can be placed anywhere on shaft
Supplied with mounting screw
Square Bore Shaft Mounting Collars are designed for use on standard square shafts or structural tubing. They can be completely disassembled and placed anywhere on a shaft. They are precision machined, non-marring, easy to adjust, with high clamping power.
These collars feature a two-piece construction with flats on outside surfaces which are drilled and tapped for attachment to each other or to other components. Also included is a countersunk hole for mounting to any surface. These collars are stackable, secure and easy to open and adjust.
The regular Stackable version has flats on two surfaces for stacking. The Stackable (Cap) version has a single flat to leave a finished outside surface when no further stacking is required.
Mount square shafts or structural tubing to components
Can be placed anywhere on shaft
Supplied with mounting screw
Square Bore Shaft Mounting Collars are designed for use on standard square shafts or structural tubing. They can be completely disassembled and placed anywhere on a shaft. They are precision machined, non-marring, easy to adjust, with high clamping power.
These collars feature a two-piece construction with flats on outside surfaces which are drilled and tapped for attachment to each other or to other components. Also included is a countersunk hole for mounting to any surface. These collars are stackable, secure and easy to open and adjust.
The regular Stackable version has flats on two surfaces for stacking. The Stackable (Cap) version has a single flat to leave a finished outside surface when no further stacking is required.
Superior holding power over set-screw type collars
Exclusively stocked by Stafford, these collars fit on standard hexagonal shafts. They can be modified (drilled, tapped, welded, etc.) to act as mounts for other components.
1-Piece Clamp-Type Shaft Collars are precision machined, non-marring, easy to adjust, with high clamping power.
Superior holding power over set-screw type collars
Exclusively stocked by Stafford, these collars fit on standard hexagonal shafts. They can be modified (drilled, tapped, welded, etc.) to act as mounts for other components.
2-Piece Clamp-Type Shaft Collars can be completely disassembled and placed anywhere on a shaft. They are precision machined, non-marring, easy to adjust, with high clamping power.
The Precision Sleeve Flange coupling allows for mounting components such as gears, motors, brake assemblies etc. to the coupling. The flange includes three through holes and three tapped holes.
It features a solid center section that provides a close tolerance fit on ground shafting, includes a keyway, and the Accu-Clamp™ design which incorporates integral self-centering clamping collars at both ends.
To assure precise shaft alignment, it maintains <.001 TIR concentricity while in use. It is precision machined, non-marring, easy to adjust, with high clamping power.
Time-saving tools for turning shafts, pipe or hex nuts
Can be used to convert socket cap screw to a knob
Twist of wrist simplifies adjustment
Knurled edge provides easy to grip surface for added torque
2-piece versions can be placed anywhere on shaft or pipe
The Clamp-On Wrench is a knurled, easy-to-grip collar that is clamped around standard pipe, a shaft or hex nut and is then tightened with a twist of the wrist. Permitting rapid tool changes, this compact wrench can be hand tightened but still allows for conventional wrenches when high torquing is required. It is manufactured from anodized aluminum for an attractive, durable finish.
Time-saving tools for turning shafts, pipe or hex nuts
Can be used to convert socket cap screw to a knob
Twist of wrist simplifies adjustment
Knurled edge provides easy to grip surface for added torque
2-piece versions can be placed anywhere on shaft or pipe
The Clamp-On Wrench is a knurled, easy-to-grip collar that is clamped around standard pipe, a shaft or hex nut and is then tightened with a twist of the wrist. Permitting rapid tool changes, this compact wrench can be hand tightened but still allows for conventional wrenches when high torquing is required. It is manufactured from anodized aluminum for an attractive, durable finish.
Time-saving tools for turning shafts, pipe or hex nuts
Can be used to convert socket cap screw to a knob
Twist of wrist simplifies adjustment
Knurled edge provides easy to grip surface for added torque
2-piece versions can be placed anywhere on shaft or pipe
The Clamp-On Wrench is a knurled, easy-to-grip collar that is clamped around standard pipe, a shaft or hex nut and is then tightened with a twist of the wrist. Permitting rapid tool changes, this compact wrench can be hand tightened but still allows for conventional wrenches when high torquing is required. It is manufactured from anodized aluminum for an attractive, durable finish.
Time-saving tools for turning shafts, pipe or hex nuts
Can be used to convert socket cap screw to a knob
Twist of wrist simplifies adjustment
Knurled edge provides easy to grip surface for added torque
2-piece versions can be placed anywhere on shaft or pipe
The Clamp-On Wrench is a knurled, easy-to-grip collar that is clamped around standard pipe, a shaft or hex nut and is then tightened with a twist of the wrist. Permitting rapid tool changes, this compact wrench can be hand tightened but still allows for conventional wrenches when high torquing is required. It is manufactured from anodized aluminum for an attractive, durable finish.
Time-saving tools for turning shafts, pipe or hex nuts
Can be used to convert socket cap screw to a knob
Twist of wrist simplifies adjustment
Knurled edge provides easy to grip surface for added torque
2-piece versions can be placed anywhere on shaft or pipe
The Clamp-On Wrench is a knurled, easy-to-grip collar that is clamped around standard pipe, a shaft or hex nut and is then tightened with a twist of the wrist. Permitting rapid tool changes, this compact wrench can be hand tightened but still allows for conventional wrenches when high torquing is required. It is manufactured from anodized aluminum for an attractive, durable finish.
