• Assure precise shaft alignment
  • Axial runout less than .001 TIR
  • Two pieces for convenient assembly and adjustment
  • Includes standard keyway
  • Smooth bore protects shafts from damage
Stafford’s exclusive Precision Sleeve Coupling features a solid center section that provides a close tolerance fit on ground shafting, includes a keyway, and the Accu-Clamp™ design which incorporates integral self-centering clamping collars at both ends.

To assure precise shaft alignment, it maintains <.001 TIR concentricity while in use.

This coupling comes completely apart to allow the most convenient assembly and adjustment. It is precision machined, non-marring, easy to adjust, with high clamping power.

Stocked in:
  • Steel
1 - 6 of 6 | Results Per Page | View | Unit of Measure

Part Number

Bore Size A

Bore Size B


Outside Diameter

Total Length


5L008008FKPSC N/A 1/2 in N/A 1/2 in N/A Steel N/A 1.250 in N/A 1.875 in N/A
5L010010FKPSC N/A 5/8 in N/A 5/8 in N/A Steel N/A 1.500 in N/A 2.250 in N/A
5L012012FKPSC N/A 3/4 in N/A 3/4 in N/A Steel N/A 1.750 in N/A 2.625 in N/A
5L100100FKPSC N/A 1 in N/A 1 in N/A Steel N/A 2.000 in N/A 3.000 in N/A
5L104104FKPSC N/A 1-1/4 in N/A 1-1/4 in N/A Steel N/A 2.250 in N/A 3.375 in N/A
5L108108FKPSC N/A 1-1/2 in N/A 1-1/2 in N/A Steel N/A 2.500 in N/A 3.750 in N/A
1 - 6 of 6 | Results Per Page | View | Unit of Measure