CAD (0)
  • Cart is empty
  • Mount pipes or tubes to components
  • Bores match OD of standard pipe
  • Stack multiple collars
  • Can be placed anywhere on pipe or tube
  • Supplied with mounting screw
Pipe Mounting Collars have bores that matches the outside diameter of standard pipe. They feature a two-piece construction with flats on outside surfaces which are drilled and tapped for attachment to each other. Also included is a countersunk hole for mounting to any surface or hung from a threaded rod. These collars are stackable, secure and easy to open and adjust.

The regular Stackable version has flats on two surfaces for stacking. The Stackable (Cap) version has a single flat to leave a finished, rounded outside surface when no further stacking is required.

2-Piece Clamp-Type Collars can be completely disassembled and placed anywhere on a shaft. They are precision machined, non-marring, easy to adjust, with high clamping power.

Stocked in:
  • Steel
  • Stainless Steel
1 - 12 of 12 | Results Per Page | View | Unit of Measure
1 

Part Number

Bore Size

Material

Pipe Size

Type

Outside Diameter

Width

CAD

Sort by
N/A 11/16 in N/A Stainless Steel N/A 3/8 in N/A Low Profile N/A 1.500 in N/A 0.500 in N/A CAD Icon (for items table)
N/A 17/20 in N/A Stainless Steel N/A 1/2 in N/A Low Profile N/A 1.750 in N/A 0.500 in N/A CAD Icon (for items table)
N/A 1-1/15 in N/A Stainless Steel N/A 3/4 in N/A High Strength N/A 2.000 in N/A 0.500 in N/A CAD Icon (for items table)
N/A 1-1/3 in N/A Stainless Steel N/A 1 in N/A High Strength N/A 2.250 in N/A 0.500 in N/A CAD Icon (for items table)
N/A 1-2/3 in N/A Stainless Steel N/A 1-1/4 in N/A Low Profile N/A 2.500 in N/A 0.500 in N/A CAD Icon (for items table)
N/A 1-11/12 in N/A Stainless Steel N/A 1-1/2 in N/A High Strength N/A 3.000 in N/A 0.500 in N/A CAD Icon (for items table)
N/A 11/16 in N/A Steel N/A 3/8 in N/A Low Profile N/A 1.500 in N/A 0.500 in N/A CAD Icon (for items table)
N/A 17/20 in N/A Steel N/A 1/2 in N/A Low Profile N/A 1.750 in N/A 0.500 in N/A CAD Icon (for items table)
N/A 1-1/15 in N/A Steel N/A 3/4 in N/A High Strength N/A 2.000 in N/A 0.500 in N/A CAD Icon (for items table)
N/A 1-1/3 in N/A Steel N/A 1 in N/A High Strength N/A 2.250 in N/A 0.500 in N/A CAD Icon (for items table)
N/A 1-2/3 in N/A Steel N/A 1-1/4 in N/A Low Profile N/A 2.500 in N/A 0.500 in N/A CAD Icon (for items table)
N/A 1-11/12 in N/A Steel N/A 1-1/2 in N/A High Strength N/A 3.000 in N/A 0.500 in N/A CAD Icon (for items table)
1 - 12 of 12 | Results Per Page | View | Unit of Measure
1