Stafford Manufacturing Corp. | The Super Source for Collars & Couplings
Stafford Manufacturing Corp.
256 Andover St.
Wilmington, MA 01887

Phone: 978.657.8000 or 800.695.5551
Fax: 978.657.4731 or 800.649.5101
Email: sales@staffordmfg.com
Website: www.staffordmfg.com
Print Back
  • Used on square shafts
  • Can be placed anywhere on shaft
  • Smooth bore protects shafts from damage
  • Superior holding power over set-screw type collars
    •
Exclusively stocked by Stafford, these collars fit on standard square shafts. They can be modified (drilled, tapped, welded, etc.) to act as mounts for other components.

2-Piece Clamp-Type Shaft Collars can be completely disassembled and placed anywhere on a shaft. They are precision machined, non-marring, easy to adjust, with high clamping power.

Stocked in:
  • Steel
  • Stainless Steel
Square Bore Shaft Collars Two-Piece Split Clamp Type
Unit of Measure
1 2 

Part Number

Bore Size

Material

Type

Outside Diameter

Width

CAD

15L106 N/A 1-3/8 in N/A Steel N/A High Strength N/A 3.250 in N/A 0.625 in N/A CAD Icon (for items table)
15S108 N/A 1-1/2 in N/A Stainless Steel N/A High Strength N/A 3.500 in N/A 0.625 in N/A CAD Icon (for items table)
15L108 N/A 1-1/2 in N/A Steel N/A High Strength N/A 3.500 in N/A 0.625 in N/A CAD Icon (for items table)
15S112 N/A 1-3/4 in N/A Stainless Steel N/A High Strength N/A 4.000 in N/A 0.750 in N/A CAD Icon (for items table)
15L112 N/A 1-3/4 in N/A Steel N/A High Strength N/A 4.000 in N/A 0.750 in N/A CAD Icon (for items table)
15S200 N/A 2 in N/A Stainless Steel N/A High Strength N/A 4.250 in N/A 0.750 in N/A CAD Icon (for items table)
15L200 N/A 2 in N/A Steel N/A High Strength N/A 4.250 in N/A 0.750 in N/A CAD Icon (for items table)
15S208 N/A 2-1/2 in N/A Stainless Steel N/A High Strength N/A 5.000 in N/A 0.750 in N/A CAD Icon (for items table)
15L208 N/A 2-1/2 in N/A Steel N/A High Strength N/A 5.000 in N/A 0.750 in N/A CAD Icon (for items table)
Unit of Measure
1 2