Stafford Manufacturing Corp. | The Super Source for Collars & Couplings
Stafford Manufacturing Corp.
256 Andover St.
Wilmington, MA 01887

Phone: 978.657.8000 or 800.695.5551
Fax: 978.657.4731 or 800.649.5101
Email: sales@staffordmfg.com
Website: www.staffordmfg.com
Print Back
  • Fully metric, including clamp screws.
  • Pilot hole for machining to desired bore size and configuration.
  • Finished bore on other side protects shafts from damage
  • Customize bore size in-house to save time and cost
  • Superior holding power over set-screw type couplings
    •
Remachineable Couplings are complete, except that they are supplied with a precision finished bore on one side and a pilot hole only on the other. They are designed to connect two dissimilar sized shafts in virtually any combination up to a 50mm bore and maintain concentricity between each half. The piloted side can be machined by the user to any size up to that of the finished bore.

These couplings allow the user to save time and cost by customizing to the desired bore size in-house.

Stocked in:
  • Steel
  • Stainless steel
Remachineable Rigid Shaft Couplings One-Piece Split Clamp-Type
Unit of Measure
1 

Part Number

Bore Size A

Pilot Hole B

Max Bore B

Material

Outside Diameter

Total Length

CAD

5LM008008REM N/A 8 mm N/A 5.953 mm N/A 8 mm N/A Steel N/A 18 mm N/A 30 mm N/A CAD Icon (for items table)
5SM008008REM N/A 8 mm N/A 5.953 mm N/A 8 mm N/A Stainless steel N/A 18 mm N/A 30 mm N/A CAD Icon (for items table)
5LM010010REM N/A 10 mm N/A 6 mm N/A 10 mm N/A Steel N/A 24 mm N/A 35 mm N/A CAD Icon (for items table)
5SM010010REM N/A 10 mm N/A 6 mm N/A 10 mm N/A Stainless steel N/A 24 mm N/A 35 mm N/A CAD Icon (for items table)
5LM012012REM N/A 12 mm N/A 6 mm N/A 12 mm N/A Steel N/A 28 mm N/A 45 mm N/A CAD Icon (for items table)
5SM012012REM N/A 12 mm N/A 6 mm N/A 12 mm N/A Stainless steel N/A 28 mm N/A 45 mm N/A CAD Icon (for items table)
5LM016016REM N/A 16 mm N/A 6 mm N/A 16 mm N/A Steel N/A 34 mm N/A 50 mm N/A CAD Icon (for items table)
5SM016016REM N/A 16 mm N/A 6 mm N/A 16 mm N/A Stainless steel N/A 34 mm N/A 50 mm N/A CAD Icon (for items table)
5LM020020REM N/A 20 mm N/A 6 mm N/A 20 mm N/A Steel N/A 40 mm N/A 65 mm N/A CAD Icon (for items table)
5SM020020REM N/A 20 mm N/A 6 mm N/A 20 mm N/A Stainless steel N/A 40 mm N/A 65 mm N/A CAD Icon (for items table)
5LM025025REM N/A 25 mm N/A 9.128 mm N/A 25 mm N/A Steel N/A 45 mm N/A 65 mm N/A CAD Icon (for items table)
5SM025025REM N/A 25 mm N/A 9.128 mm N/A 25 mm N/A Stainless steel N/A 45 mm N/A 65 mm N/A CAD Icon (for items table)
5LM030030REM N/A 30 mm N/A 9.128 mm N/A 30 mm N/A Steel N/A 54 mm N/A 75 mm N/A CAD Icon (for items table)
5SM030030REM N/A 30 mm N/A 9.128 mm N/A 30 mm N/A Stainless steel N/A 54 mm N/A 75 mm N/A CAD Icon (for items table)
5LM035035REM N/A 35 mm N/A 9.128 mm N/A 35 mm N/A Steel N/A 57 mm N/A 80 mm N/A CAD Icon (for items table)
5SM035035REM N/A 35 mm N/A 9.128 mm N/A 35 mm N/A Stainless steel N/A 57 mm N/A 80 mm N/A CAD Icon (for items table)
5LM040040REM N/A 40 mm N/A 12.303 mm N/A 40 mm N/A Steel N/A 60 mm N/A 90 mm N/A CAD Icon (for items table)
5SM040040REM N/A 40 mm N/A 12.303 mm N/A 40 mm N/A Stainless steel N/A 60 mm N/A 90 mm N/A CAD Icon (for items table)
5LM045045REM N/A 45 mm N/A 12.303 mm N/A 45 mm N/A Steel N/A 73 mm N/A 105 mm N/A CAD Icon (for items table)
5SM045045REM N/A 45 mm N/A 12.303 mm N/A 45 mm N/A Stainless steel N/A 73 mm N/A 105 mm N/A CAD Icon (for items table)
5LM050050REM N/A 50 mm N/A 12.303 mm N/A 50 mm N/A Steel N/A 78 mm N/A 120 mm N/A CAD Icon (for items table)
5SM050050REM N/A 50 mm N/A 12.303 mm N/A 50 mm N/A Stainless steel N/A 78 mm N/A 120 mm N/A CAD Icon (for items table)
Unit of Measure
1