• Collar ID matches pipe OD sizes
  • Impart torque without damage to pipe or tube
  • Wrench flats allow use of standard open end wrench
  • Can be placed anywhere on pipe or tube
Pipe Wrenching Collars enable users to turn pipes without using a pipe wrench which can scratch, gouge, or crush them. The hinge style with a captive screw makes them easy to install and they have wrenching flats on their OD, which allow the use of a standard open-end wrench. The collar bore matches standard pipe OD sizes.

Stocked in:
  • Steel
1 - 6 of 6 | Results Per Page | View | Unit of Measure
1 

Part Number

Bore Size

Material

Pipe Size

Type

Outside Diameter

Width

WP2L011H N/A 0.690 in N/A Steel N/A 3/8 in N/A Low Profile N/A 1.500 in N/A 0.500 in
WP2L014H N/A 0.857 in N/A Steel N/A 1/2 in N/A Low Profile N/A 1.750 in N/A 0.500 in
WP2L101H N/A 1.065 in N/A Steel N/A 3/4 in N/A Low Profile N/A 2.000 in N/A 0.500 in
WP2L105H N/A 1.330 in N/A Steel N/A 1 in N/A Low Profile N/A 2.250 in N/A 0.500 in
WP2L111H N/A 1.675 in N/A Steel N/A 1-1/4 in N/A Low Profile N/A 3.000 in N/A 0.625 in
WP2L114H N/A 1.915 in N/A Steel N/A 1-1/2 in N/A Low Profile N/A 3.250 in N/A 0.625 in
1 - 6 of 6 | Results Per Page | View | Unit of Measure
1