• Easily moves parts along shafts without damage
  • High axial force ideal for moving shrink fit and frozen parts
  • Can be placed anywhere on shaft
  • Protects face and bearing seals from damage
The Axial Thrust Assembly is used to impart a high level of axial force to any shaft-mounted component. It comes completely apart and can be mounted anywhere along a shaft. Move anything, without damage to shaft or component, without the use of potentially damaging hammers.

It is made up of two steel two-piece collars. One of these collars can slide freely along the shaft to push up against the component to be moved while the other clamps securely to the shaft. Simple to use, the stationary collar has four alloy thrust screws that can be tightened sequentially against the sliding collar and push the part without damaging the face or bearing seals.

Ideal for removing shrink-fit or frozen parts, it can be infinitely repositioned along a shaft and offers from 5,000 to 8,000 lbs. thrust, depending on size.

Stocked in Steel.
1 - 8 of 8 | Results Per Page | View | Unit of Measure
1 

Part Number

Fixed Collar ID

Slide Collar ID

Material

Fixed Collar Width

Slide Collar Width

ATA0012 N/A 3/4 in N/A 3/4 in N/A Steel N/A 0.625 in N/A 0.625 in
ATA0100 N/A 1 in N/A 1 in N/A Steel N/A 0.625 in N/A 0.625 in
ATA0104 N/A 1-1/4 in N/A 1-1/4 in N/A Steel N/A 0.625 in N/A 0.625 in
ATA0108 N/A 1-1/2 in N/A 1-1/2 in N/A Steel N/A 0.625 in N/A 0.625 in
ATA0112 N/A 1-3/4 in N/A 1-3/4 in N/A Steel N/A 0.750 in N/A 0.750 in
ATA0200 N/A 2 in N/A 2 in N/A Steel N/A 0.750 in N/A 0.750 in
ATA0204 N/A 2-1/4 in N/A 2-1/4 in N/A Steel N/A 0.750 in N/A 0.750 in
ATA0208 N/A 2-1/2 in N/A 2-1/2 in N/A Steel N/A 0.750 in N/A 0.750 in
1 - 8 of 8 | Results Per Page | View | Unit of Measure
1