• Can be placed anywhere on shaft
  • Smooth bore protects shafts from damage
  • Superior holding power over set-screw type collars
  • Offered in High Strength, Low Profile and Heavy Duty styles
  • Stocked in a variety of materials
2-Piece Clamp-Type Shaft Collars are for use on standard round shafts, hard or soft, as well as on thin wall tube or over a split hub. They can be completely disassembled and placed anywhere on a shaft. Precision machined, non-marring, easy to adjust, with high clamping power, they are stocked in the following materials:
  • Steel
  • Stainless Steel
  • Aluminum
  • Nylon
  • Delrin
Offered in three styles:
  • High Strength: Clamp screw does not protrude beyond the outside diameter (OD)
  • Low Profile: Clamp screw protrudes beyond the OD
  • Heavy Duty: Uses larger clamp screw and has larger OD for 2X holding power
Standard Series offers economy-priced versions of low-profile styles (32LXXX and 32SXXX parts).
1 - 10 of 10 | Results Per Page | View | Unit of Measure
1 

Part Number

Bore Size

Material

Type

Outside Diameter

Width

8MW004 N/A 1/4 in N/A Steel N/A Low Profile N/A 0.688 in N/A 0.313 in
8MW006 N/A 3/8 in N/A Steel N/A Low Profile N/A 0.875 in N/A 0.375 in
8MW008 N/A 1/2 in N/A Steel N/A Low Profile N/A 1.125 in N/A 0.406 in
8MW010 N/A 5/8 in N/A Steel N/A Low Profile N/A 1.313 in N/A 0.438 in
8MW012 N/A 3/4 in N/A Steel N/A Low Profile N/A 1.500 in N/A 0.500 in
8MW100 N/A 1 in N/A Steel N/A Low Profile N/A 1.750 in N/A 0.500 in
8MW104 N/A 1-1/4 in N/A Steel N/A Low Profile N/A 2.063 in N/A 0.500 in
8MW108 N/A 1-1/2 in N/A Steel N/A Low Profile N/A 2.375 in N/A 0.563 in
8MW112 N/A 1-3/4 in N/A Steel N/A Low Profile N/A 2.750 in N/A 0.688 in
8MW200 N/A 2 in N/A Steel N/A Low Profile N/A 3.000 in N/A 0.688 in
1 - 10 of 10 | Results Per Page | View | Unit of Measure
1