• Used on square shafts
  • Can be placed anywhere on shaft
  • Smooth bore protects shafts from damage
  • Superior holding power over set-screw type collars
Exclusively stocked by Stafford, these collars fit on standard square shafts. They can be modified (drilled, tapped, welded, etc.) to act as mounts for other components.

2-Piece Clamp-Type Shaft Collars can be completely disassembled and placed anywhere on a shaft. They are precision machined, non-marring, easy to adjust, with high clamping power.

Stocked in:
  • Steel
  • Stainless Steel
1 - 25 of 34 | Results Per Page | View | Unit of Measure
1 2 
Clear Filter

Bore Size (in)

Material

  • Stainless Steel
  • Steel

Type

Outside Diameter (in)

Width (in)

Search Suggestions

Part Number

Bore Size

Material

Type

Outside Diameter

Width

15S004 N/A 1/4 in N/A Stainless Steel N/A High Strength N/A 1.063 in N/A 0.313 in
15L004 N/A 1/4 in N/A Steel N/A High Strength N/A 1.063 in N/A 0.313 in
15S005 N/A 5/16 in N/A Stainless Steel N/A High Strength N/A 1.063 in N/A 0.313 in
15L005 N/A 5/16 in N/A Steel N/A High Strength N/A 1.063 in N/A 0.313 in
15S006 N/A 3/8 in N/A Stainless Steel N/A High Strength N/A 1.500 in N/A 0.406 in
15L006 N/A 3/8 in N/A Steel N/A High Strength N/A 1.500 in N/A 0.406 in
15S007 N/A 7/16 in N/A Stainless Steel N/A High Strength N/A 1.500 in N/A 0.406 in
15L007 N/A 7/16 in N/A Steel N/A High Strength N/A 1.500 in N/A 0.406 in
15S008 N/A 1/2 in N/A Stainless Steel N/A High Strength N/A 1.750 in N/A 0.500 in
15L008 N/A 1/2 in N/A Steel N/A High Strength N/A 1.750 in N/A 0.500 in
15S009 N/A 9/16 in N/A Stainless Steel N/A High Strength N/A 1.750 in N/A 0.500 in
15L009 N/A 9/16 in N/A Steel N/A High Strength N/A 1.750 in N/A 0.500 in
15S010 N/A 5/8 in N/A Stainless Steel N/A High Strength N/A 2.000 in N/A 0.500 in
15L010 N/A 5/8 in N/A Steel N/A High Strength N/A 2.000 in N/A 0.500 in
15S012 N/A 3/4 in N/A Stainless Steel N/A High Strength N/A 2.125 in N/A 0.500 in
15L012 N/A 3/4 in N/A Steel N/A High Strength N/A 2.125 in N/A 0.500 in
15S014 N/A 7/8 in N/A Stainless Steel N/A High Strength N/A 2.250 in N/A 0.500 in
15L014 N/A 7/8 in N/A Steel N/A High Strength N/A 2.250 in N/A 0.500 in
15S100 N/A 1 in N/A Stainless Steel N/A High Strength N/A 2.500 in N/A 0.500 in
15L100 N/A 1 in N/A Steel N/A High Strength N/A 2.500 in N/A 0.500 in
15S102 N/A 1-1/8 in N/A Stainless Steel N/A High Strength N/A 3.000 in N/A 0.625 in
15L102 N/A 1-1/8 in N/A Steel N/A High Strength N/A 3.000 in N/A 0.625 in
15S104 N/A 1-1/4 in N/A Stainless Steel N/A High Strength N/A 3.000 in N/A 0.625 in
15L104 N/A 1-1/4 in N/A Steel N/A High Strength N/A 3.000 in N/A 0.625 in
15S106 N/A 1-3/8 in N/A Stainless Steel N/A High Strength N/A 3.250 in N/A 0.625 in
1 - 25 of 34 | Results Per Page | View | Unit of Measure
1 2