• Precision-machined hub on collar face limits contact area
  • Ideal for bearing inner-race
  • Use on standard UNF shafts
  • Can be placed anywhere on shaft
  • Superior holding power over set-screw type collars
Designed for use on standard UNF shafts, Threaded Hub Collars feature a precision-machined hub on the face that limits the contact area, minimizing friction. They are ideally suited as a bearing inner-race. Non-marring, easy to adjust, with high clamping power, they can be completely disassembled and placed anywhere on a shaft.

Stocked in:
  • Steel
1 - 12 of 12 | Results Per Page | View | Unit of Measure
1 

Part Number

Threaded Bore Size

Material

Type

Outside Diameter

Width

HUB8L008C N/A 1/2-13 N/A Steel N/A Low Profile N/A 1.125 in N/A 0.406 in
HUB8L008F N/A 1/2-20 N/A Steel N/A Low Profile N/A 1.125 in N/A 0.406 in
HUB8L010C N/A 5/8-11 N/A Steel N/A Low Profile N/A 1.313 in N/A 0.438 in
HUB8L010F N/A 5/8-18 N/A Steel N/A Low Profile N/A 1.313 in N/A 0.438 in
HUB8L012C N/A 3/4-10 N/A Steel N/A Low Profile N/A 1.500 in N/A 0.500 in
HUB8L012F N/A 3/4-16 N/A Steel N/A Low Profile N/A 1.500 in N/A 0.500 in
HUB8L100C N/A 1-8 N/A Steel N/A Low Profile N/A 1.750 in N/A 0.500 in
HUB8L100F N/A 1-14 N/A Steel N/A Low Profile N/A 1.750 in N/A 0.500 in
HUB8L104C N/A 1-1/4-7 N/A Steel N/A Low Profile N/A 2.062 in N/A 0.500 in
HUB8L104F N/A 1-1/4-12 N/A Steel N/A Low Profile N/A 2.062 in N/A 0.500 in
HUB8L108C N/A 1-1/2-6 N/A Steel N/A Low Profile N/A 2.375 in N/A 0.562 in
HUB8L108F N/A 1-1/2-12 N/A Steel N/A Low Profile N/A 2.375 in N/A 0.562 in
1 - 12 of 12 | Results Per Page | View | Unit of Measure
1