• Pilot hole for machining to desired bore size and configuration.
  • Finished bore on other side protects shafts from damage
  • Customize bore size in-house to save time and cost
  • Superior holding power over set-screw type couplings
Remachineable Couplings are complete, except that they are supplied with a precision finished bore on one side and a pilot hole only on the other. They are designed to connect two dissimilar sized shafts in virtually any combination up to a 2” bore and maintain concentricity between each half. The piloted side can be machined by the user to any size up to that of the finished bore.

These couplings allow the user to same time and cost by customizing to the desired bore size in-house.

Stocked in:
  • Steel
1 - 11 of 11 | Results Per Page | View | Unit of Measure
1 

Part Number

Bore Size A

Pilot Hole Size B

Maximum Bore Size B

Material

Outside Diameter

Total Length

5L008008REM N/A 1/2 in N/A 0.235 in N/A 1/2 in N/A Steel N/A 1.250 in N/A 1.875 in
5L010010REM N/A 5/8 in N/A 0.235 in N/A 5/8 in N/A Steel N/A 1.500 in N/A 2.250 in
5L012012REM N/A 3/4 in N/A 0.235 in N/A 3/4 in N/A Steel N/A 1.750 in N/A 2.625 in
5L014014REM N/A 7/8 in N/A 0.235 in N/A 7/8 in N/A Steel N/A 1.875 in N/A 2.875 in
5L100100REM N/A 1 in N/A 0.360 in N/A 1 in N/A Steel N/A 2.000 in N/A 3.000 in
5L102102REM N/A 1-1/8 in N/A 0.360 in N/A 1-1/8 in N/A Steel N/A 2.125 in N/A 3.250 in
5L104104REM N/A 1-1/4 in N/A 0.360 in N/A 1-1/4 in N/A Steel N/A 2.250 in N/A 3.375 in
5L106106REM N/A 1-3/8 in N/A 0.360 in N/A 1-3/8 in N/A Steel N/A 2.375 in N/A 3.625 in
5L108108REM N/A 1-1/2 in N/A 0.485 in N/A 1-1/2 in N/A Steel N/A 2.500 in N/A 3.750 in
5L112112REM N/A 1-3/4 in N/A 0.485 in N/A 1-3/4 in N/A Steel N/A 3.000 in N/A 4.500 in
5L200200REM N/A 2 in N/A 0.485 in N/A 2 in N/A Steel N/A 3.250 in N/A 4.875 in
1 - 11 of 11 | Results Per Page | View | Unit of Measure
1