• Threaded bore accept popular sensor sizes
  • Mount to Standoffs and Bases
  • Face holes for mounting to other components
  • Can be placed anywhere on shaft
  • Do not damage shafts
The Sensor Mount System Collars are available in five metric threaded sizes to accept the most popular sensor sizes. They have a machined flat and a counterbore in the collar OD to allow them to be mounted to the UPS Standoffs and Bases. They also feature face holes for mounting to other components.

Stocked in:
  • Aluminum
The Sensor Mount System is designed to accept popular sizes of electromagnetic sensors. The sensor is inserted into the threaded collar, which can be attached to a Standoff or to another component. The Standoffs and Bases have varying heights and base configurations.
1 - 5 of 5 | Results Per Page | View | Unit of Measure
1 

Part Number

Threaded Bore Size

Material

Outside Diameter

Width

SEN3AM8X1FA N/A M8x1.0 N/A Aluminum N/A 0.813 in N/A 0.250 in
SEN3AM8X1FB N/A M8x1.0 N/A Aluminum N/A 0.813 in N/A 0.250 in
SEN3AM12X1F N/A M12x1.0 N/A Aluminum N/A 1.250 in N/A 0.500 in
SEN3AM18X1F N/A M18x1.0 N/A Aluminum N/A 1.750 in N/A 0.500 in
SEN3AM30X1.5F N/A M30x1.5 N/A Aluminum N/A 2.250 in N/A 0.563 in
1 - 5 of 5 | Results Per Page | View | Unit of Measure
1