• Mount shafts to surface or components
  • Smooth bore protects shafts from damage
  • Use with Pipe Adapter Bushings to match OD of Schedule 40 Pipe
Shaft Mounting Collars feature a flat and a countersunk, tapped hole to mount easily to a surface or component, or hung from a threaded rod.

1-Piece Clamp-Type Shaft Collars are designed for use on standard round shafts, hard or soft, as well as on thin wall tube or over a split hub. They are precision machined, non-marring, easy to adjust, with high clamping power.

Stocked in:
  • Steel
  • Stainless Steel
1 - 12 of 12 | Results Per Page | View | Unit of Measure
1 

Part Number

Bore Size

Material

Type

Outside Diameter

Width

19S012MT N/A 3/4 in N/A Stainless Steel N/A Low Profile N/A 1.500 in N/A 0.500 in
19L012MT N/A 3/4 in N/A Steel N/A Low Profile N/A 1.500 in N/A 0.500 in
19S100MT N/A 1 in N/A Stainless Steel N/A Low Profile N/A 1.750 in N/A 0.500 in
19L100MT N/A 1 in N/A Steel N/A Low Profile N/A 1.750 in N/A 0.500 in
19S102MT N/A 1-1/8 in N/A Stainless Steel N/A Low Profile N/A 1.875 in N/A 0.500 in
19L102MT N/A 1-1/8 in N/A Steel N/A Low Profile N/A 1.875 in N/A 0.500 in
19S104MT N/A 1-1/4 in N/A Stainless Steel N/A Low Profile N/A 2.063 in N/A 0.500 in
19L104MT N/A 1-1/4 in N/A Steel N/A Low Profile N/A 2.063 in N/A 0.500 in
19S106MT N/A 1-3/8 in N/A Stainless Steel N/A Low Profile N/A 2.250 in N/A 0.563 in
19L106MT N/A 1-3/8 in N/A Steel N/A Low Profile N/A 2.250 in N/A 0.563 in
19S108MT N/A 1-1/2 in N/A Stainless Steel N/A Low Profile N/A 2.375 in N/A 0.563 in
19L108MT N/A 1-1/2 in N/A Steel N/A Low Profile N/A 2.375 in N/A 0.563 in
1 - 12 of 12 | Results Per Page | View | Unit of Measure
1