• Mount shafts to surface or components
  • Can be placed anywhere on shaft
  • Smooth bore protects shafts from damage
  • Mounting screw included
Shaft Mounting Collars feature a flat and a countersunk, tapped hole to mount easily to a surface or component, or hung from a threaded rod.

Stafford’s exclusive Hinge Shaft Collars are perfect where fast operation is required, such as hostile environments or situations where there are space and time constraints.

Hinge Shaft Collars are functionally similar to two-piece collars, for use on standard round shafts, hard or soft, as well as on thin wall tube or over a split hub.

They are easy to assemble, reposition, and take apart; eliminating fumbling, lost screws and wasted time. Hinge Shaft Collars provide the same axial holding power as conventional collars. They have a smooth bore that will not damage shafts.

Stocked in:
  • Steel
  • Stainless Steel
1 - 12 of 12 | Results Per Page | View | Unit of Measure
1 

Part Number

Bore Size

Material

Type

Outside Diameter

Width

32S012HCP N/A 3/4 in N/A Stainless Steel N/A Low Profile N/A 1.500 in N/A 0.500 in
32L012HCP N/A 3/4 in N/A Steel N/A Low Profile N/A 1.500 in N/A 0.500 in
32S100HCP N/A 1 in N/A Stainless Steel N/A Low Profile N/A 1.750 in N/A 0.500 in
32L100HCP N/A 1 in N/A Steel N/A Low Profile N/A 1.750 in N/A 0.500 in
32S102HCP N/A 1-1/8 in N/A Stainless Steel N/A Low Profile N/A 1.875 in N/A 0.500 in
32L102HCP N/A 1-1/8 in N/A Steel N/A Low Profile N/A 1.875 in N/A 0.500 in
32S104HCP N/A 1-1/4 in N/A Stainless Steel N/A Low Profile N/A 2.063 in N/A 0.500 in
32L104HCP N/A 1-1/4 in N/A Steel N/A Low Profile N/A 2.063 in N/A 0.500 in
32S106HCP N/A 1-3/8 in N/A Stainless Steel N/A Low Profile N/A 2.250 in N/A 0.563 in
32L106HCP N/A 1-3/8 in N/A Steel N/A Low Profile N/A 2.250 in N/A 0.563 in
32S108HCP N/A 1-1/2 in N/A Stainless Steel N/A Low Profile N/A 2.375 in N/A 0.563 in
32L108HCP N/A 1-1/2 in N/A Steel N/A Low Profile N/A 2.375 in N/A 0.563 in
1 - 12 of 12 | Results Per Page | View | Unit of Measure
1