CAD (0)
  • Cart is empty
  • Can be used as a stop, locator or adjustable shim
  • Provides micrometer-like adjustability of either or both collar faces
  • Knurled edges for easy turning
  • Superior axial holding power
The Micro-Adjust Stop Collar Assembly clamps directly to a shaft and provide fine-tune adjustability in either direction. The collar assembly consists of two knurled collars which clamp directly onto a shaft and feature a male-female connecting hub that provides a range of adjustment.

Designed for accurate fine-tune positioning, the collars connect using 40 pitch threads that operate smoothly, each traveling 0.025” per turn. Since the entire assembly consists of two one-piece collars which clamp directly to a shaft and screw into each other, it provides superior axial holding power.

To make a simple axial adjustment, just clamp one side of the assembly on a shaft, move the other side, then clamp it, and repeat the process infinitely as needed.

Stocked in:
  • Steel
  • Stainless Steel
1 - 16 of 16 | Results Per Page | View | Unit of Measure
1 

Part Number

Bore Size

Material

Outside Diameter

Total Width

N/A 3/8 in N/A Stainless Steel N/A 0.875 in N/A 1.500 in
N/A 3/8 in N/A Steel N/A 0.875 in N/A 1.500 in
N/A 1/2 in N/A Stainless Steel N/A 1.125 in N/A 1.563 in
N/A 1/2 in N/A Steel N/A 1.125 in N/A 1.563 in
N/A 5/8 in N/A Stainless Steel N/A 1.313 in N/A 1.875 in
N/A 5/8 in N/A Steel N/A 1.313 in N/A 1.875 in
N/A 3/4 in N/A Stainless Steel N/A 1.500 in N/A 2.000 in
N/A 3/4 in N/A Steel N/A 1.500 in N/A 2.000 in
N/A 1 in N/A Stainless Steel N/A 1.750 in N/A 2.000 in
N/A 1 in N/A Steel N/A 1.750 in N/A 2.000 in
N/A 1-1/4 in N/A Stainless Steel N/A 2.063 in N/A 2.250 in
N/A 1-1/4 in N/A Steel N/A 2.063 in N/A 2.250 in
N/A 1-3/8 in N/A Stainless Steel N/A 2.250 in N/A 2.250 in
N/A 1-3/8 in N/A Steel N/A 2.250 in N/A 2.250 in
N/A 1-1/2 in N/A Stainless Steel N/A 2.375 in N/A 2.500 in
N/A 1-1/2 in N/A Steel N/A 2.375 in N/A 2.500 in
1 - 16 of 16 | Results Per Page | View | Unit of Measure
1