CAD (0)
  • Cart is empty
  • Precision-machined hub on collar face limits contact area
  • Ideal for bearing inner-race
  • Can be placed anywhere on shaft
  • Smooth bore protects shafts from damage
  • Superior holding power over set-screw type collars
Hub collars feature a precision-machined hub on the face that limits the contact area, minimizing friction. It is ideally suited as a bearing inner-race.

2-Piece Clamp-Type Shaft Collars are designed for use on standard round shafts, hard or soft, as well as on thin wall tube or over a split hub. They can be completely disassembled and placed anywhere on a shaft. They are non-marring, easy to adjust, with high clamping power.

Stocked in:
  • Steel
1 - 6 of 6 | Results Per Page | View | Unit of Measure
1 

Part Number

Bore Size

Material

Type

Outside Diameter

Width

CAD

N/A 1/2 in N/A Steel N/A Low Profile N/A 1.125 in N/A 0.406 in N/A CAD Icon (for items table)
N/A 5/8 in N/A Steel N/A Low Profile N/A 1.313 in N/A 0.438 in N/A CAD Icon (for items table)
N/A 3/4 in N/A Steel N/A Low Profile N/A 1.500 in N/A 0.500 in N/A CAD Icon (for items table)
N/A 1 in N/A Steel N/A Low Profile N/A 1.750 in N/A 0.500 in N/A CAD Icon (for items table)
N/A 1-1/4 in N/A Steel N/A Low Profile N/A 2.063 in N/A 0.500 in N/A CAD Icon (for items table)
N/A 1-1/2 in N/A Steel N/A Low Profile N/A 2.375 in N/A 0.563 in N/A CAD Icon (for items table)
1 - 6 of 6 | Results Per Page | View | Unit of Measure
1