• Used on hexagonal shafts
  • Smooth bore protects shafts from damage
  • Superior holding power over set-screw type collars
Exclusively stocked by Stafford, these collars fit on standard hexagonal shafts. They can be modified (drilled, tapped, welded, etc.) to act as mounts for other components.

1-Piece Clamp-Type Shaft Collars are precision machined, non-marring, easy to adjust, with high clamping power.

Stocked in:
  • Steel
  • Stainless Steel
1 - 18 of 18 | Results Per Page | View | Unit of Measure
1 

Part Number

Hex Bore Size

Material

Type

Outside Diameter

Width

12S004 N/A 1/4 in N/A Stainless Steel N/A High Strength N/A 0.813 in N/A 0.250 in
12L004 N/A 1/4 in N/A Steel N/A High Strength N/A 0.813 in N/A 0.250 in
12S005 N/A 5/16 in N/A Stainless Steel N/A High Strength N/A 0.813 in N/A 0.250 in
12L005 N/A 5/16 in N/A Steel N/A High Strength N/A 0.813 in N/A 0.250 in
12S006 N/A 3/8 in N/A Stainless Steel N/A High Strength N/A 1.063 in N/A 0.313 in
12L006 N/A 3/8 in N/A Steel N/A High Strength N/A 1.063 in N/A 0.313 in
12S007 N/A 7/16 in N/A Stainless Steel N/A High Strength N/A 1.250 in N/A 0.375 in
12L007 N/A 7/16 in N/A Steel N/A High Strength N/A 1.250 in N/A 0.375 in
12S008 N/A 1/2 in N/A Stainless Steel N/A High Strength N/A 1.250 in N/A 0.375 in
12L008 N/A 1/2 in N/A Steel N/A High Strength N/A 1.250 in N/A 0.375 in
12S010 N/A 5/8 in N/A Stainless Steel N/A High Strength N/A 1.500 in N/A 0.406 in
12L010 N/A 5/8 in N/A Steel N/A High Strength N/A 1.500 in N/A 0.406 in
12S012 N/A 3/4 in N/A Stainless Steel N/A High Strength N/A 1.875 in N/A 0.500 in
12L012 N/A 3/4 in N/A Steel N/A High Strength N/A 1.875 in N/A 0.500 in
12S014 N/A 7/8 in N/A Stainless Steel N/A High Strength N/A 2.000 in N/A 0.500 in
12L014 N/A 7/8 in N/A Steel N/A High Strength N/A 2.000 in N/A 0.500 in
12S100 N/A 1 in N/A Stainless Steel N/A High Strength N/A 2.125 in N/A 0.500 in
12L100 N/A 1 in N/A Steel N/A High Strength N/A 2.125 in N/A 0.500 in
1 - 18 of 18 | Results Per Page | View | Unit of Measure
1