• Allows rapid linear adjustment of clamping collars
  • Single handle replaces clamp screw and wrench
  • Metric thread
  • Features a knurled OD for a sure grip
The Grip & Go™ Metric Thread Quick Release Clamping Handle replaces a clamp screw in any metric clamp-type shaft collar to allow rapid repositioning without the need for a wrench. It is the perfect solution in applications where clamping collars require frequent adjustments along a shaft.

It is ideal for making frequent linear adjustments to a feed mechanism, adjusting stroke length or table height, and positioning a test instrument. This clamping handle is not intended for rotary applications.

Stocked in:
  • Steel
  • Stainless Steel
  • Aluminum
1 - 12 of 12 | Results Per Page | View | Unit of Measure
1 

Part Number

Material

Thread Size

Handle Diameter

Total Length

9AGGM003 N/A Aluminum N/A M3x0.5 N/A 0.500 in N/A 3.375 in
9SGGM003 N/A Stainless Steel N/A M3x0.5 N/A 0.500 in N/A 3.375 in
9LGGM003 N/A Steel N/A M3x0.5 N/A 0.500 in N/A 3.375 in
9AGGM004 N/A Aluminum N/A M4x0.7 N/A 0.500 in N/A 3.375 in
9SGGM004 N/A Stainless Steel N/A M4x0.7 N/A 0.500 in N/A 3.375 in
9LGGM004 N/A Steel N/A M4x0.7 N/A 0.500 in N/A 3.375 in
9AGGM005 N/A Aluminum N/A M5x0.8 N/A 1.000 in N/A 5.134 in
9SGGM005 N/A Stainless Steel N/A M5x0.8 N/A 1.000 in N/A 5.134 in
9LGGM005 N/A Steel N/A M5x0.8 N/A 1.000 in N/A 5.134 in
9AGGM006 N/A Aluminum N/A M6x1.0 N/A 1.000 in N/A 5.134 in
9SGGM006 N/A Stainless Steel N/A M6x1.0 N/A 1.000 in N/A 5.134 in
9LGGM006 N/A Steel N/A M6x1.0 N/A 1.000 in N/A 5.134 in
1 - 12 of 12 | Results Per Page | View | Unit of Measure
1