• Use as is to make shaft larger
  • Keyways provide added torque capacity and fixed shaft phasing
  • Fully machineable to change size or configuration
  • Eliminates need for complete shaft replacement.
  • No welding required.
Shaft Adapters are designed to modify, extend or repair an existing shaft and provide a fully machineable male output shaft with minimum effort and expense. Standard keyways provide added torque capacity and fixed shaft phasing.

For use on standard hardened round shafts, Shaft Adapters are precision machined, non-marring, easy to adjust, with high clamping power.

Stocked in:
  • Steel
  • Stainless Steel
1 - 14 of 14 | Results Per Page | View | Unit of Measure
1 

Part Number

Bore Size

Material

Shaft Diameter

Outside Diameter

Total Length

5ES008K N/A 1/2 in N/A Stainless Steel N/A 3/4 in N/A 1.250 in N/A 2.750 in
5EL008K N/A 1/2 in N/A Steel N/A 3/4 in N/A 1.250 in N/A 2.750 in
5ES010K N/A 5/8 in N/A Stainless Steel N/A 7/8 in N/A 1.500 in N/A 3.250 in
5EL010K N/A 5/8 in N/A Steel N/A 7/8 in N/A 1.500 in N/A 3.250 in
5ES012K N/A 3/4 in N/A Stainless Steel N/A 1 in N/A 1.750 in N/A 4.250 in
5EL012K N/A 3/4 in N/A Steel N/A 1 in N/A 1.750 in N/A 4.250 in
5ES014K N/A 7/8 in N/A Stainless Steel N/A 1-1/8 in N/A 1.875 in N/A 4.375 in
5EL014K N/A 7/8 in N/A Steel N/A 1-1/8 in N/A 1.875 in N/A 4.375 in
5ES100K N/A 1 in N/A Stainless Steel N/A 1-1/4 in N/A 2.000 in N/A 4.750 in
5EL100K N/A 1 in N/A Steel N/A 1-1/4 in N/A 2.000 in N/A 4.750 in
5ES102K N/A 1-1/8 in N/A Stainless Steel N/A 1-3/8 in N/A 2.125 in N/A 4.750 in
5EL102K N/A 1-1/8 in N/A Steel N/A 1-3/8 in N/A 2.125 in N/A 4.750 in
5ES104K N/A 1-1/4 in N/A Stainless Steel N/A 1-1/2 in N/A 2.250 in N/A 5.000 in
5EL104K N/A 1-1/4 in N/A Steel N/A 1-1/2 in N/A 2.250 in N/A 5.000 in
1 - 14 of 14 | Results Per Page | View | Unit of Measure
1