• Use as is to make shaft larger
  • Fully machineable to change size or configuration
  • Eliminates need for complete shaft replacement.
  • No welding required.
  • Clamp-type coupling end won't mar shaft.
Shaft Adapters are designed to modify, extend or repair an existing shaft and provide a fully machineable male output shaft with minimum effort and expense. For use on standard hardened round shafts, Shaft Adapters are precision machined, non-marring, easy to adjust, with high clamping power.

Stocked in:
  • Steel
  • Stainless Steel
1 - 14 of 14 | Results Per Page | View | Unit of Measure
1 

Part Number

Bore Size

Material

Shaft Diameter

Outside Diameter

Total Length

5ES008 N/A 1/2 in N/A Stainless Steel N/A 3/4 in N/A 1.250 in N/A 2.750 in
5EL008 N/A 1/2 in N/A Steel N/A 3/4 in N/A 1.250 in N/A 2.750 in
5ES010 N/A 5/8 in N/A Stainless Steel N/A 7/8 in N/A 1.500 in N/A 3.250 in
5EL010 N/A 5/8 in N/A Steel N/A 7/8 in N/A 1.500 in N/A 3.250 in
5ES012 N/A 3/4 in N/A Stainless Steel N/A 1 in N/A 1.750 in N/A 4.250 in
5EL012 N/A 3/4 in N/A Steel N/A 1 in N/A 1.750 in N/A 4.250 in
5ES014 N/A 7/8 in N/A Stainless Steel N/A 1-1/8 in N/A 1.875 in N/A 4.375 in
5EL014 N/A 7/8 in N/A Steel N/A 1-1/8 in N/A 1.875 in N/A 4.375 in
5ES100 N/A 1 in N/A Stainless Steel N/A 1-1/4 in N/A 2.000 in N/A 4.750 in
5EL100 N/A 1 in N/A Steel N/A 1-1/4 in N/A 2.000 in N/A 4.750 in
5ES102 N/A 1-1/8 in N/A Stainless Steel N/A 1-3/8 in N/A 2.125 in N/A 4.750 in
5EL102 N/A 1-1/8 in N/A Steel N/A 1-3/8 in N/A 2.125 in N/A 4.750 in
5ES104 N/A 1-1/4 in N/A Stainless Steel N/A 1-1/2 in N/A 2.250 in N/A 5.000 in
5EL104 N/A 1-1/4 in N/A Steel N/A 1-1/2 in N/A 2.250 in N/A 5.000 in
1 - 14 of 14 | Results Per Page | View | Unit of Measure
1